1 Piece Adapter Picatinny (Extended)

£29.95

Converts 9-11mm airgun and 3/8in rifle dovetail into a Weaver/Picatinny rail
Extended single-piece base (Hawke model 22402) for longer mounting room
Rear set screw lets you tilt the rail down to add elevation for long range
Forward position stop stops the base creeping under recoil
Fixed with quad hex (3mm) screws, 8-32 thread fixings
Lightweight aluminium build at roughly 96g

Hurry! Only 1 unit left in stock!

Guaranteed Safe Checkout

Why Buy From Platoon Stores

In-House Repair Workshop in Rochester Kent

Kent's Only Authorised 5.11 Tactical Retailer

UKARA Registered Retailer

What our customers are saying

Be the first to leave a review.

Write a Review

There are no reviews yet.

Description
Specification

What it is

The Hawke 1 Piece Adapter Picatinny (Extended), model 22402, is a single-piece aluminium base that converts a 9-11mm airgun dovetail or a 3/8in rifle dovetail into a full Weaver/Picatinny rail. That opens your rifle or air rifle up to the huge range of modern rings, optics and accessories built for Weaver/Picatinny fitment.

Adjustable elevation

A rear set screw lets you gradually tilt the rail top downwards towards the trajectory of your pellet or round. This is ideal for overcoming barrel droop or compensating for heavy drop at longer ranges, so you keep more usable adjustment inside your scope turrets.

Built to hold zero

A forward position stop prevents the base creeping down the dovetail under recoil, while quad hex (3mm) fixings on an 8-32 thread clamp it down firmly. At roughly 96g it adds minimal weight.

Getting set up

Pair it with matching rings and an optic from our outdoor shooting range, or browse related airsoft accessories for mounting hardware.

Product information reviewed by James Smith. Every gun is checked & serviced by our Rochester workshop before dispatch.

General
Brand	Hawke
Dimensions
Weight	96g / 3.4oz
Other
Output rail	Weaver / Picatinny
Configuration	1 piece
Barcode	5054492224029
Input rail	9-11mm airgun / 3/8in (9.5mm) rifle dovetail
Model	22402
Product type	Adaptor base
Rail length	Extended profile (approx 6.8in)
Fixings (rail)	Quad hex (3mm)
Thread (rail)	8-32
Elevation	Adjustable via rear set screw
Recoil control	Forward position stop

Recommended upgrades & accessories

Frequently asked questions

What rails does this adapter fit?

It clamps onto a 9-11mm airgun dovetail or a 3/8in (9.5mm) rifle dovetail rail and gives you a Weaver/Picatinny top surface for modern mounts and optics.

Does it add elevation for longer ranges?

Yes. A rear set screw lets you gradually tilt the Weaver top downwards towards the trajectory, which helps overcome barrel droop or heavy bullet drop at distance.

Will it move under recoil?

A forward position stop holds the base in place so it does not creep down the rail during recoil, keeping your zero stable.

What tools do I need to fit it?

The rail fixings use quad hex (3mm) screws on an 8-32 thread, so a standard 3mm hex/Allen key is all that is needed to mount and adjust it.

Is this the extended version?

Yes, this is the extended Hawke 22402 base with a longer rail than the standard 22401, giving more room to position rings or accessories.

1 Piece Adapter Picatinny (Extended)