Your Cart
Established 2006. Kent's Only Authorised 5.11 Tactical Retailer

What our customers are saying

Be the first to leave a review.

There are no reviews yet.

Titan 11.1v 1200mAh 25c Li-Po AK Styke Stick battery - airsoft power at Platoon Stores

Your email address will not be published. Required fields are marked *

Drag and drop images here or click to upload

More voltage, more speed

This Titan Power stick battery is an 11.1V 3S LiPo rated at 1200mAh, stepping up from the 7.4V version for a faster rate of fire and snappier trigger response. The 25C discharge rating supports around 30A of continuous current, so the gun keeps up during sustained firing.

AK-style stick shape

The slim stick format is made to slide into AK top covers and other long, narrow stick compartments found in AEGs and some SMGs. Always confirm your replica has space for the pack and is rated for 11.1V.

Deans / T-plug ready

It comes fitted with a Deans / T-plug main connector and a standard 3S balance lead. Explore more batteries and consumables to keep your loadout charged.

Use it wisely

Higher voltage puts more strain on gears, motor and trigger contacts, so it is best used in guns built or upgraded to handle it, ideally with a MOSFET. Match it to a suitable rifle from our airsoft range.

General
BrandTitan Power
Other
Connector TypeSmall Tamiya, T-Plug
Battery ChemistryLiPo
Battery Voltage11.1V
Capacity1200mAh
Cell configuration3S (3 cells in series)
ChemistryLithium Polymer (LiPo)
Voltage11.1V
Discharge rate25C continuous
Approx max currentAround 30A
Main connectorDeans / T-plug
Balance connectorJST-XH 3S
ConfigurationStick (AK style)
Intended useAirsoft AEGs and SMGs
ChargingBalance charge recommended

Frequently asked questions

How is this different from the 7.4V version?

This is an 11.1V 3S pack rather than 7.4V 2S. The higher voltage gives a faster rate of fire and snappier trigger response, but the gun must be built to handle it.

What guns is it for?

The slim AK-style stick shape suits AK top covers and other narrow stick compartments in AEGs and some SMGs. Check your replica has room and is rated for 11.1V.

What connector does it use?

It uses a Deans / T-plug main connector, a common high-current airsoft fitting, plus a 3S balance lead.

How should I charge it?

Charge on a balance charger through the balance lead and never leave lithium packs charging unattended.

Is 11.1V safe for any AEG?

Not always. Higher voltage stresses gears, motor and switch, so use it only in guns built or upgraded to handle it, ideally with a MOSFET.